Thermopulse Compact Diathermy

THERMOPULSE Description

          THERMOPULSE case  is very modern and it   was designed following the existing  standards of developing equipment. It has a front panel that enables the therapist  to easily adjust the appliance.

          This is a of high frequency  (HF) generator in 27.12 MHz. THERMOPULSE permits  the choice of mode of short waves emission in automatic continuous or pulsed .

Due to its  timer, it enables the choice of application time on 10, 15 or 20 minutes by automatically switching off the emission of short waves at the end of  scheduled time.

PRODUCT FEATURES

          THERMOPULSE was designed for continuous operating mode. It is a Class I single-phase equipment with type BF applied for  security and protection against electric shock. It is not protected against harmful water penetration (IPX0). Concerning the limits to electromagnetic disturbance,  THERMOPULSE is a electro-medical equipment which belongs to the Group II Class A.

Power source: – Bivolt 110/240 V ~ (60 Hz); 

Consumption (Max): – Va 400; 

Timer: – 10.15 or 20 minutes; 

Frequency of O.C: – 27.12 MHz; 

Maximum intensity of output power to an electrode-skin distance of approximately 1 to 1.5 cm (with resistive load of 50 O): 

– Continuous mode:- 100 W; 

– Auto pulsed  mode: – Auto scan frequency (30-100 Hz). 

Rectangular pulse with duration of 0.4 milliseconds: – 100 W (peak); 

auto pulsed  mode: 

– Time to go from 30 to 100 Hz (via Intermediary freq. ): – 25seconds; 

– Time to go to  100 from 30 Hz (via . Intermediary freq): – 25seconds. 

Valves: – 2 x 812.

Dimension approx. (mm): – 340 x 325 x 870 (W x D x H); 

Weight (approx. without accessories): – 30 kg; 

Stacking up: – Do not stack boxes; 

Temperature with transportation:- 50-50 ° C; 

Environment operating temperature: – 5-45 ° C.

Note: THERMOPULSE is not protected against  water infiltration. Be careful when using liquids near the equipment. For a perfect and safe operation of your equipment, use only valves supplied by IBRAMED.

Abbreviations of units of measurement used:

mA = milliamperes; 

uA = microamps; 

Hz = hertz; 

Va = volt amps; 

mm = mm; 

usec = us = microseconds; 

msec = milliseconds; 

O = ohms; 

V ~ = AC voltage; 

cm = centimeter; 

W = watts; 

mW = milliwatts.

Accessories accompanying the equipment:

– 01 Operating Manual; 

– 01 Pair of malleable electrodes; 

– 01 Term of guarantee (annex to the manual); 

– 01 Detachable power cord; 

– 02 Spare fuses for protection.

Ps:. Using cables, electrodes and other accessories different from those specified above may result in increased emissions or decreased immunity of equipment.

Note: The device and its features may change without notice.